Mounting a downrigger on small boat

Talk about your boats, trailers, and boating specific topics here. Sponsored by Life Proof Boats.
Post Reply
jpjames14
Angler
Posts: 7
Joined: Mon Jan 07, 2013 9:08 am

Mounting a downrigger on small boat

Post by jpjames14 » Tue Sep 23, 2014 3:32 pm

Hey all,

I have a 10ft sportcat, much like a Livingston except it doesn't have the seating area up the middle. It's got regular seats and then two seats in the back. I have a cannon manual downrigger i want to mount on it. The back two seats, and I by seats I mean fiberglass platforms, are about 6-10 inches below the gunwale. I would like to mount my swivel mount on it, but clearly it's a bit too low and somehow needs to be raised up to meet where the gunwale is. How do you do this?

I'm sure this has been done before but I can't find anything on it.

User avatar
eat-sleep-fish
Warrant Officer
Posts: 130
Joined: Wed Nov 07, 2012 7:42 am

Re: Mounting a downrigger on small boat

Post by eat-sleep-fish » Tue Sep 23, 2014 4:00 pm

I have seen guys do that with a piece on angle stainless steel the same width as the base of the downrigger. Fasten it to the side and the seat of the boat so the surface is level with your rail. I did a Google search of "angle bracket for downrigger" and several other options came up. Hope this helps.

ResQ
Captain
Posts: 601
Joined: Mon Mar 21, 2011 2:57 pm
Location: Oly, wa

Re: Mounting a downrigger on small boat

Post by ResQ » Tue Sep 23, 2014 4:03 pm

Scroll down the boat threads. I did one of these back in July and one earlier. Just look through.

User avatar
scraig1962
Petty Officer
Posts: 76
Joined: Sun Aug 08, 2010 8:25 pm
Location: Arlington, WA
Contact:

Re: Mounting a downrigger on small boat

Post by scraig1962 » Wed Sep 24, 2014 11:00 am

I think the main issue here is you have fiberglass boat and, judging by the pics I found of the boat on Google, there is no access to the backside of the seat platforms. Coming up with a mount for an aluminum boat is a lot easier. The mounting surface will need to be pretty solid if you going to mount it to those seat platforms. If the seats are pretty solid, I would just use a pedestal for the swivel mount similar to this one: Image and lag them down with lag bolts and silicone sealer. I did something similar on my old aluminum boat, but I saved money by making them from aluminum I got from work. If the mounting surface is real thin, I would think about adding some thick plywood to the top of the seats for the pedestals to mount to.

jpjames14
Angler
Posts: 7
Joined: Mon Jan 07, 2013 9:08 am

Re: Mounting a downrigger on small boat

Post by jpjames14 » Wed Sep 24, 2014 1:34 pm

Awesome... All useful information and good places to start. Thanks guys. I do agree it's going to be a bit trickier with the fiberglass and how the seat is designed. I cannot get under it without drilling out a port hole. Regardless of what I do I will want to do that because I need to put on some big washers underneath this thing.

User avatar
GCB069
Petty Officer
Posts: 72
Joined: Mon May 28, 2007 9:40 pm
Location: Edwall,WA ( 40 miles west of Spokane off SR 2)

Re: Mounting a downrigger on small boat

Post by GCB069 » Wed Sep 24, 2014 3:20 pm

This is how I did it on a 14' Starcraft...... 2 Aluminum blocks each side screwed and glued with screw on D/R
Attachments
downriggers.jpg
downriggers.jpg (62.33 KiB) Viewed 10671 times
Last edited by GCB069 on Wed Sep 24, 2014 7:08 pm, edited 2 times in total.

User avatar
dutchman2858
Commander
Posts: 322
Joined: Sat Jun 26, 2010 6:31 am
Location: Marysville

Re: Mounting a downrigger on small boat

Post by dutchman2858 » Wed Sep 24, 2014 6:52 pm

I had to get into the sides of the cockpit on a pristine 28' Bayliner 2858 when I was rigging it with downriggers for chartering. I believe I drilled holes using a 4" holesaw (AFTER carefully checking for wires, etc.!) and fitting a waterproof hole cover. Works great and looks good.
Attachments
410Pgxo0jbL.jpg
410Pgxo0jbL.jpg (17.64 KiB) Viewed 10673 times

obryan214
Commander
Posts: 422
Joined: Sun Aug 28, 2011 11:14 pm
Location: Tacoma

Re: Mounting a downrigger on small boat

Post by obryan214 » Fri Sep 26, 2014 2:32 pm

the one in my crestliner is mounted to a block of wood mounted to my wood seat top. it raised the bracket up 4" which was plenty.

jpjames14
Angler
Posts: 7
Joined: Mon Jan 07, 2013 9:08 am

Re: Mounting a downrigger on small boat

Post by jpjames14 » Tue Sep 30, 2014 8:30 am

Thanks guys. I purchased a 6inch pedestal mount. Got a decent deal on one through ebay. I still have about 4inches or so I need to raise up so my thought is building a box to mount on top of the seat, then mount the pedestal to that. I'll probably put a door on the box somehow to make more storage. I will use the hole saw and hole cap to cover! Thanks for the tip on that. Picture to come after this mess is done [huh]

Post Reply