Too big for crappie..maybe big enough for bass?

An area to discuss your Bassin' adventures.
Forum rules
Forum Post Guidelines: This Forum is rated “Family Friendly”. Civil discussions are encouraged and welcomed. Name calling, negative, harassing, or threatening comments will be removed and may result in suspension or IP Ban without notice. Please refer to the Terms of Service and Forum Guidelines post for more information. Thank you
Post Reply
User avatar
JT26
Commander
Posts: 487
Joined: Sun May 06, 2007 10:12 am
Location: Bellevue

Too big for crappie..maybe big enough for bass?

Post by JT26 » Tue Jul 29, 2008 10:44 pm

My dad ordered these little spinners for crappie..the problem is they are to big for any crappie on the westside.
There about 2.5inches. Does anyone think they will work for bass? Smallies or Largemouths? I can add those little 3 inch trout power worms as a trailer to so that might help...

Image

User avatar
Toni
Sponsor
Sponsor
Posts: 3186
Joined: Mon Apr 30, 2007 10:47 pm
Location: Graham

RE:Too big for crappie..maybe big enough for bass?

Post by Toni » Tue Jul 29, 2008 11:21 pm

While at Lake Tanwax a couple years ago I was casting something similar to what you have pictured. I was casting for bass and caught crappie.
Since you said it was 2.5 inches I got the one we used and measured it. Mine is 2". It caught crappie.
Look for Wannafish A Lure on FaceBook

He said, “Throw your net on the right side of the boat and you will find some.” When they did, they were unable to haul the net in because of the large number of fish.

User avatar
Proverb
Warrant Officer
Posts: 157
Joined: Mon Jul 23, 2007 1:39 pm
Location: Eastern Washington

RE:Too big for crappie..maybe big enough for bass?

Post by Proverb » Tue Jul 29, 2008 11:22 pm

Looks like they'd work for crappie to me I've used a jig like that without the flasher. I've caught Perch on something that looks very similar to that too. I have caught a small bass on a jig a little bigger than that instead of having the squid tube like body though it had a beetle. I've got Crappie on the red/white one without the flasher, perch on the green with the flasher, and small mouth with orange. Wasn't a big small mouth though only 11 inches.

User avatar
Gringo Pescador
Moderator
Moderator
Posts: 2564
Joined: Wed May 23, 2007 8:35 am

RE:Too big for crappie..maybe big enough for bass?

Post by Gringo Pescador » Wed Jul 30, 2008 6:08 am

I've been using the mini strike kings - which are about the same size. And catching bass of all sizes (both small and large mouth) with em..
I fish not because I regard fishing as being terribly important, but because I suspect that so many of the other concerns of men are equally unimportant, and not nearly so much fun. ~ John Volker

User avatar
topdawg47
Warrant Officer
Posts: 174
Joined: Sun Mar 02, 2008 4:45 pm

RE:Too big for crappie..maybe big enough for bass?

Post by topdawg47 » Wed Jul 30, 2008 6:13 am

Those are not to big for Crappie. Believe me they will attack those lures if that is the right presentation for day. I have had a crank bait on and had Crappie attack, just depends. If anything you will catch bigger Crappies...
Go Huskies!

User avatar
HillbillyGeek
Captain
Posts: 755
Joined: Tue Jan 08, 2008 2:50 pm
Location: Lake Stevens

RE:Too big for crappie..maybe big enough for bass?

Post by HillbillyGeek » Wed Jul 30, 2008 6:37 am

topdawg47 wrote:Those are not to big for Crappie. Believe me they will attack those lures if that is the right presentation for day. I have had a crank bait on and had Crappie attack, just depends. If anything you will catch bigger Crappies...
Yep, I'd use em -- they ain't too big.

One of my favorite crappie lures is a #1 Mepps Aglia Long, which the same length as those jigs.
Piscatory Geekus Maximus

User avatar
delyakguy
Warrant Officer
Posts: 174
Joined: Fri May 09, 2008 8:50 am
Location: Yakima

RE:Too big for crappie..maybe big enough for bass?

Post by delyakguy » Wed Jul 30, 2008 8:55 am

I caught crappie yesterday on 4'' senko. Those are not too big for crappie believe me!! But best bet is white, white/yellow, white/red, and yellow/red jigs w/o spinner.

JT26, did you have any luck at Mardon Resort/Potholes? I see your avatar is taken from main dock there.
Somebody just back of you while you are fishing is as bad as someone looking over your shoulder while you write a letter to your girl. ~Ernest Hemingway

Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery

User avatar
JT26
Commander
Posts: 487
Joined: Sun May 06, 2007 10:12 am
Location: Bellevue

RE:Too big for crappie..maybe big enough for bass?

Post by JT26 » Wed Jul 30, 2008 12:00 pm

Im sure if i fish a lake with really aggresive crappie they would hit those. Its just that in Blueberry Lake and Lake Cassidy, i've never even had a hit until i switched to these little micro jigs. They were like 1/32 or 1/64 oz. I think they may work around the docks on Beaver and Phantom for bass...

And delyak guy, i had a great time at Potholes. I wrote a whole long report, but accidently closed the browser before it closed. I haven't got to doing it again..Anyways, i caught alot of smallies. The problem was they were all little i guys. I caught maybe 35 smallies over the 3 or 4 days, with only 7 over a pound. Biggest one when just under 3. The dock at mardon was much better than anywhere i tried from boat. I only caught 2 nice ones of boat, one way down from mardon on the dam, and another at the island. I did best throwing a perch pattern crank at the dam. I tried senko's the most but had almost no luck, just a few. Once i switched to cranks it got much better. Also caught some bluegills.
Last edited by Anonymous on Wed Jul 30, 2008 12:00 pm, edited 1 time in total.

User avatar
ChrisB
Captain
Posts: 865
Joined: Sat May 05, 2007 11:48 pm
Location: Seattle WA

RE:Too big for crappie..maybe big enough for bass?

Post by ChrisB » Wed Jul 30, 2008 2:58 pm

I'm not a Crappie King, but I agree with TopDawg. Those should catch plenty of crappie, if you know where they hang out.
aka Powerworm

User avatar
Jordan
Lieutenant
Posts: 209
Joined: Sun Mar 23, 2008 6:13 pm
Location: East Wenatchee, WA
Contact:

RE:Too big for crappie..maybe big enough for bass?

Post by Jordan » Fri Aug 01, 2008 3:49 pm

I have used those exact same jigs w/o the blade and caught tons of Crappie! it just depends on the size of the crapppie you are catching i guess... but those look awesome to me!
Ozzie

"Do what you like. Like what you do."

<><

User avatar
fishman123
Petty Officer
Posts: 36
Joined: Mon Feb 11, 2008 6:32 pm
Location: Vancouver

RE:Too big for crappie..maybe big enough for bass?

Post by fishman123 » Mon Aug 04, 2008 9:26 am

I've only caught crappie with those

User avatar
Gisteppo
Commodore
Posts: 1016
Joined: Fri Jun 22, 2007 11:26 am
Location: Lake Spokane (Long)
Contact:

RE:Too big for crappie..maybe big enough for bass?

Post by Gisteppo » Mon Aug 04, 2008 10:11 am

+1

Ive caught 12" crappie on 4" crankbaits and 5" worms. The Thumb has hooked up many crappie and smallmouth on that exact lure.

E

Post Reply