need some final tips on my boat.

Talk about your boats, trailers, and boating specific topics here. Sponsored by Life Proof Boats.
Post Reply
User avatar
Mikeel1987
Warrant Officer
Posts: 163
Joined: Sun Jan 30, 2011 12:24 am
Location: Centralia
Contact:

need some final tips on my boat.

Post by Mikeel1987 » Fri Feb 18, 2011 11:37 am

So i have a 15 ft trihull seaswirl with a 55 hp evinrude on it. I have a 12 hp 2 stroke i bought at a yard sale a few years ago and was wondering if that would be to big as a kicker for that setup. I'm looking to mainly troll the sound and columbia with it. Also I fish lakes quite a bit is that to big for there? I have a bow mount electrick motor I'm not sure what size anymore. Ill have to check but if Im trolling for trout or kokanee I dont want to constantly be controlling the foot pedal to re adjust its just easier doing it by hand when they are available. My second question is Where is good place to get back to back seats for cheap? I'm not picky as long as there are no tears in the seats. I need 2 of them. If anyone has some let me know what you want for them and I might just get them from you.

User avatar
Lotech Joe
Commodore
Posts: 1139
Joined: Sun Apr 29, 2007 6:19 am
Location: Liberty Lake, Washington

RE:need some final tips on my boat.

Post by Lotech Joe » Sun Feb 20, 2011 3:40 am

I don't know about the seats, but years ago I used to have a 16' Runabout with a 75 horse Evinrude. I used a 7 1/2 horse kicker for trolling and it had plenty of power. Even enough power to right the boats heading if a gust of wind got me twisted up. BTW, the boat was an old marine plywood boat and it was heavy. It was made by Higgins. The same folks out of Louisiana that made the landing craft used in WWII.
Where you go is less important than how you get there.
Fish With A Friend
Lotech Joe

User avatar
Mikeel1987
Warrant Officer
Posts: 163
Joined: Sun Jan 30, 2011 12:24 am
Location: Centralia
Contact:

RE:need some final tips on my boat.

Post by Mikeel1987 » Sun Feb 20, 2011 6:25 am

So you think a 12 HP is to much for a kicker on that boat then? I've decided that I will make my own seats.

User avatar
hewesfisher
Admiral
Posts: 1886
Joined: Sat Apr 28, 2007 8:20 am
Location: Spangle, WA

RE:need some final tips on my boat.

Post by hewesfisher » Sun Feb 20, 2011 6:39 am

Mikeel1987 wrote:So you think a 12 HP is to much for a kicker on that boat then?
We've got an 8hp kicker on our 20 footer and it's plenty. I can troll all day and, if necessary, run it WOT for 5 - 6mph. A smaller kicker (8 or 9hp) might be better, but you've got the 12hp and I'm sure it will do the job.
Phil

'09 Hewescraft 20' ProV
150hp Merc Optimax
8hp Merc 4-stroke
Raymarine DS600X HD Sounder
Raymarine a78 MultiFunctionDisplay
Raymarine DownVision
Raymarine SideVision
Baystar Hydraulic Steering
Trollmaster Pro II
Traxstech Fishing System
MotorGuide 75# Thrust Wireless Bow Mount

User avatar
fishnazzi
Warrant Officer
Posts: 149
Joined: Mon Mar 30, 2009 11:52 am
Location: everett

RE:need some final tips on my boat.

Post by fishnazzi » Sun Feb 20, 2011 8:01 am

If it proves to be to much.........a couple buckets thrown over as troll bags will work just fine.
Last edited by Anonymous on Sun Feb 20, 2011 8:01 am, edited 1 time in total.

User avatar
Lotech Joe
Commodore
Posts: 1139
Joined: Sun Apr 29, 2007 6:19 am
Location: Liberty Lake, Washington

RE:need some final tips on my boat.

Post by Lotech Joe » Sun Feb 20, 2011 9:04 am

I think your 12 horse will work just fine. A big plus for that much H/P is if your main motor goes belly up on you, there's still enough umph in the kicker to get you back to the launch in a timely fashion.
Where you go is less important than how you get there.
Fish With A Friend
Lotech Joe

User avatar
Matt
Admiral
Posts: 2186
Joined: Sat Apr 28, 2007 1:56 pm
Location: WaRshington

RE:need some final tips on my boat.

Post by Matt » Sun Feb 20, 2011 9:48 am

The 12 HP is probably fine. I had a 15 hp on Evinrude on my boat before I switched it out for an 8hp recently and the 15 trolled down just fine for trout and kokanee fishing. My boat is an 17' aluminum, it only weighs 1,100 pounds. I have seen back to back seats on cragslist a couple of different times lately. If it were me I would just get 2 seats up front and leave the rest of the boat wide open for a nice big fishing platform and room to move around!
"When I grow up I want to be,
One of the harvesters of the sea.
I think before my days are done,
I want to be a fisherman."

User avatar
kidkodger
Angler
Posts: 3
Joined: Fri Nov 21, 2008 1:57 pm
Location: renton

RE:need some final tips on my boat.

Post by kidkodger » Sun Feb 20, 2011 6:32 pm

I would be most concerned about the weight of the 12hp motor. You can have a prop shop re-pitch your prop if it trolls too fast.

User avatar
Matt
Admiral
Posts: 2186
Joined: Sat Apr 28, 2007 1:56 pm
Location: WaRshington

RE:need some final tips on my boat.

Post by Matt » Sun Feb 20, 2011 7:01 pm

On a heavy fiberglass trihull I don't think the weight should be much of an issue.
"When I grow up I want to be,
One of the harvesters of the sea.
I think before my days are done,
I want to be a fisherman."

User avatar
Mikeel1987
Warrant Officer
Posts: 163
Joined: Sun Jan 30, 2011 12:24 am
Location: Centralia
Contact:

RE:need some final tips on my boat.

Post by Mikeel1987 » Sun Feb 20, 2011 7:25 pm

Ya didn't even think about having the prop redone if its too fast. good idea thanks. and ya the weight shouldnt matter especially since it's a 2 stroke so pretty light i can pick it up with one hand.

Post Reply