Page 1 of 1

2001 Skeeter ZX190 with 150HPDI

Posted: Tue Sep 13, 2011 11:39 pm
by y2says
[img]null[/img]I think it's time for me to upgrade to a bigger boat, but before that I have to sell this one first. Here are the specs:



2001 Skeeter ZX190

150 VMAX HPDI Yamaha motor

Minnkota Maxxum 80lb

2 Lowrance LMS520C and flasher

Trailer tires are about 2 years old

New cranking battery, the other two are about 2 years old

Maintained and serviced at Angler's Marine and Limit Out Performance

Installed recessed foot pedal, hotfoot, water/fuel seperator, new plugs, 3 bank battery charger, LED brake lights, new trailer cables and much more.



Last time I checked the number of hours on it back in 2007 it only had 39hrs on it.



This boat is really clean and runs like a champ and garaged kept it's whole life.



$13,995



206-402-1015


Skeeter, Ranger, Triton, Nitro, Phoenix, Legend, Procraft, Stratos, Cobra, Champion, bass, fishing, yamaha

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 1:08 am
by Big D
Pics?

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 3:11 am
by y2says
Pics added

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 1:47 pm
by deepbuzzer
Was she ever used in salt water?

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 2:15 pm
by y2says
Nope...never in salt

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 3:19 pm
by AJ's Dad
What length do they call the ZX 190? My 18' ranger is a shorter than I want. I want enough front deck space to lay a 7' rod on the deck with the handle forward, and not hang the tip over the fiberglass of the console.

RE:2001 Skeeter ZX190 with 150HPDI

Posted: Wed Sep 14, 2011 10:06 pm
by y2says
18'6" and my 7' rod doesn't hang off to the side. The rod locker actually will fit a 7'6" rod.