2012 Rivercraft Drift Boat and Northwest Trailer $8,500 OBO

[LCWilson3006]

***$8,500 OBO RiverCraft 16'x60" bottom Drift Boat and Northwest Trailer ***
(2011 manufactured with a 2012 sales date)

***No motor or electrical with this sale***

This boat in great condition -- second owner which carries a 2017 Oregon Marine Board license and US Coast Guard Certificate. The boat is described as 16 ft. long and with a 60" bottom and having a seventeen inch Pavati style door on starboard (right) side front ($500 value for the door alone) and fully powder coated inside.

It comes with front two seats with a walk through and has a center pedestal for fourth seat ($500 value). The two front seats are aluminum framed and padded (with arm rests) ($590 value). The boat has under seat dry storage (5 compartments) -- storage slides and seat slides to adjust for boat balance. This boat has a Pizza oven with a Mr. Heater Cooker space heater and outlet hose for auxiliary rower heater with 10 lb. propane bottle ($675 value). Additionally, the boat has a stern (starboard [right] side) anchor lock with anchor nest and 30 lb. anchor; with, twenty-foot anchor rope ($334.95 value).

The boat has a rear Fish-On seat with Attwood pedestals (two 1- 11" and 1-24" variable to 30") ($210.98 value). The rower seat is 23" with three compartment storage ($490 value). The floor is all flat Diamond plate level floor ($1,285 value). The bottom of the boat had "Coat it" put on approximately two years ago, ($100.60 value). And, yes it has dual drain plugs ($10 value). For an additional amenity, the boat is equipped with four sliding (adjustable) rod holders ($109 value).

This boat has the options needed to go salmon, steelhead, trout, and bass fishing -- side drifting, plugging and plunking, bobber, trolling, and boon-dogging for a few examples.

Excellent condition. Title in hand. Cash or Cashiers Check Only

***The Sawyer Oars (2) SquareTop V-Lam***
Per Sawyer's, they make a "very popular Sawyer SquareTop Oar with our beautiful V-Lam blade. This is a solid wood oar from the top of the laminated Douglas Fir handle and shaft to the laminated Western Red Cedar blade. Incorporates the unduplicated feel and progressive flex from a tapered wood shaft and the strength of Fiberglass/Carbon X-Weave reinforcement. The over-sized square top provides a counter balanced feel without compromising flotation."

Features:
• Solid laminated Douglas Fir wood oar
• Fiberglass/Carbon X-Weave reinforced shaft
• Fiberglass reinforced V-Lam blade with Dynel and Kevlar ProTip tip protection
• Counter balanced "Square Top"
• Comes standard with rope wrap and rubber stop

Specifications:
• Shaft diameter at Wrap: 2.3"
• Three V-Lam blade choices:
o Narrow Flex: 6" W x 30" L
o 9' (overall length)

These two oars sell in the store for $399.99 each for 9' oar. That's a $799.98 value as these two oars which are practically new.


***Aluminum Northwest Trailer with catwalk ($2,500 value)***
The trailer was manufactured in Roseburg, Oregon, with standard LED marine trailer lights. Along with the extras, the trailer has a catwalk ($400 value) to keep your feet dry when unloading and loading.

It also has:
• Boat Buckle Tie Downs ($129.95 value)
• Spare tire with mount ($275 value)
• Oregon licensed for Interstate travel (e.g., California) through October, 2018

The boat and trailer combined has an approximate dry weight of 1,250 lbs.

Standard Features:
• Fully welded 60 61 tubing frame
• 2″ x 3 1/2″ x 3/16″ frame
• 3″ x 3 1/2″ x 1/4″ tongue
• 2K galvanized torsion axle
• Acculube spindles
• Six-ply ST radial tires (205/75R14) Great Tread
• Clear coat aluminum wheels
• 5K safety cables
• 1.3K winch
• 2″ 3.5K coupler
• Diamond plate fenders and steps (fully enclosed)
• LED lighting
• 1K swing-a-way jack
• 2″ galvanized rear roller

Optional - has this on trailer
• Catwalks with grip tape (Deck and apex)

Contact me (Les) at 541-459-0467
Location: I-5 Exit 146 (20-miles North of Roseburg, Oregon)
More photos on Craigslist at: https://roseburg.craigslist.org/boa/5990025201.html