Wanted - 4 to 10 hp outboard

SnohoBassGuy · Post by **SnohoBassGuy** » Sun Mar 15, 2009 1:45 pm

I'm looking to purchase a reliable outboard for my 12'. I have just been having some poor luck with motors lately. Johnson, Evinrude, Mercury, Sears, it dont matter, as long as it will start up, run, and keep me fishing without hassle.

Please PM me or reply here.

Much appreciated.

Ryan_1 · Post by **Ryan_1** » Mon Mar 16, 2009 3:53 pm

I have a 1969 evinrude 6hp that i know runs but needs the spark plugs cleaned and a new fuel line. I also have new spark plugs for it

SnohoBassGuy · Post by **SnohoBassGuy** » Mon Mar 16, 2009 5:43 pm

How much are you asking for it?

Anglinarcher · Post by **Anglinarcher** » Tue Mar 17, 2009 9:25 am

Hey guys, if anyone knows of something similar, I have a friend looking for the same thing over here in the Spokane Area. The boat is old, but looks to be reliable, so he wants a motor that is similar - old but reliable. LOL

SnohoBassGuy · Post by **SnohoBassGuy** » Tue Mar 17, 2009 11:39 am

Yeah, I'm still looking too.

Ryan_1 · Post by **Ryan_1** » Tue Mar 17, 2009 4:34 pm

I am thinking around $450.00 for it but make me an offer if you think that it is to high.

SnohoBassGuy · Post by **SnohoBassGuy** » Wed Mar 18, 2009 11:30 am

1969 might be a bit old. I'm looking for something really reliable.

Thank you though.

wishniwasfishn · Post by **wishniwasfishn** » Wed Mar 18, 2009 5:49 pm

I have a 6hp Johnson 1975ish new magnetos runs great I am just not using it anymore my fishing partner picked up a Tohatsu that we use so this motor just hangs in the garage taking up space.

SnohoBassGuy · Post by **SnohoBassGuy** » Thu Mar 19, 2009 6:27 am

Wishin, I think Spokane might be a tad bit far for me to get a motor :compress:

Anglinarcher · Post by **Anglinarcher** » Thu Mar 19, 2009 9:52 am

wishniwasfishn wrote:I have a 6hp Johnson 1975ish new magnetos runs great I am just not using it anymore my fishing partner picked up a Tohatsu that we use so this motor just hangs in the garage taking up space.

Wishin, let me know the price with a PM and I'll pass this on to my friend.

wishniwasfishn · Post by **wishniwasfishn** » Thu Mar 19, 2009 10:06 am

I would like to see 400.00 for it the new mags were put in 3-4 years ago and it has not had much use since then. I am new to the site and dont know how to send you an e mail direct YET but just give me time, I catch on quick..

SnohoBassGuy · Post by **SnohoBassGuy** » Thu Mar 19, 2009 10:21 am

for the purposes of sending PM's, there is an icon below everyones post that shows the "PM" sign. Click that to send the message. FYI.

tommytitan08 · Post by **tommytitan08** » Thu Mar 19, 2009 6:13 pm

snohobass have you checked craigslist for the seattle tacoma area. I'm looking right now and theres a 7.5hp mercury longshaft for 475 out of Pt. angeles that was posted today, and a 6hp evinrude short shaft in tacoma for 500. If you haven't checked it out you might want to it's updated daily.

Anglinarcher · Post by **Anglinarcher** » Fri Mar 20, 2009 9:12 am

wishniwasfishn wrote:I would like to see 400.00 for it the new mags were put in 3-4 years ago and it has not had much use since then. I am new to the site and dont know how to send you an e mail direct YET but just give me time, I catch on quick..

Wishin, the price is not bad, but my friend just got talked into wanting a 9 or 10 HP by his son. I think that it is a bit over-sized, but I can understand.

Is it a long shaft or a short shaft motor, it might make a good kicker on my boat, and if not mine, then perhaps someone else's on here.

SnohoBassGuy · Post by **SnohoBassGuy** » Fri Mar 20, 2009 9:32 am

tommytitan08 wrote:snohobass have you checked craigslist for the seattle tacoma area. I'm looking right now and theres a 7.5hp mercury longshaft for 475 out of Pt. angeles that was posted today, and a 6hp evinrude short shaft in tacoma for 500. If you haven't checked it out you might want to it's updated daily.

I have been looking on Craigslist about every two hours, and I saw a screaming deal on there for a 9.9 for $250. Apparently they didnt know their prices too well. Unfortunatelly I called to late.

My price range is limited, but that also is limiting what I can get. I really want a 7-10 hp, but somehow I dont think I will find one I can afford.

SnohoBassGuy · Post by **SnohoBassGuy** » Sat Mar 21, 2009 3:04 pm

Greens, that 5 hp sounds great. I'm looking at 9.9 tomorrow (Sunday). If I dont pick that one up, I will definitely be giving you a holler. If not, then someone else should pick that one up lol.

Thanks.

SnohoBassGuy · Post by **SnohoBassGuy** » Mon Mar 23, 2009 8:52 am

Well, I picked up the 9.9. Got a great deal on it too. Its a 1996 Mercury 9.9 and I got it for only $500.

Should we leave this thread open for Greenskeeper's motors? His are good deals too.

Northwest Fishing Reports

Wanted - 4 to 10 hp outboard

Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard

RE:Wanted - 4 to 10 hp outboard